Looking for a Notifier distributor or dealer?
If you need a Notifier fire alarm for your own building or project, you need more than a box: the panel and devices must be selected for your floor plan, installed with the right fire-rated cable, programmed, tested and handed over with drawings. We do all of this, with a GST invoice, and maintain the system afterwards. For project and tender quantities we quote the panel, loop devices, sounders and accessories as one itemised package.
Addressable or conventional: when Notifier makes sense
| Conventional | Detectors are grouped in zones; the panel shows which zone is in alarm, not which room. Lower cost, suits small offices, shops and small buildings. |
|---|---|
| Addressable | Every detector and call point has its own address, so the panel shows the exact device and location. Fewer cables per floor on large sites, easier fault finding, and the usual choice for hospitals, malls, hotels, large offices and factories. |
Notifier is mainly chosen for addressable systems. For smaller sites we may suggest a conventional system instead; see our fire alarm system page and the guide to fire alarm for fire NOC in Gurugram.
What our Notifier work includes
- Site survey and device layout from your drawings (smoke, heat and multi-sensor detectors, manual call points, hooters).
- Supply of the panel and devices with the manufacturer warranty.
- Installation with fire-rated cable, programming of device addresses and location text, and links to lifts, AHUs, access control and PA where needed.
- Testing, handover documents for the fire NOC, staff training and AMC with periodic testing.