Swing barrier gate in Noida: supply, installation and AMC

Where a swing barrier fits in Noida

Noida has a large number of high-rise housing societies, IT offices and factories, and each uses swing barriers differently:

• Society clubhouses, gyms and tower lobbies in the high-rise sectors along the Noida Expressway and in Noida Extension, where residents use a card or face and guests are let in by the guard. The vehicle gate usually has a boom barrier; the swing lanes control people at the lobby or amenity entrance.
• IT and office buildings in Sector 62, Sector 63 and Sectors 125–135, where a swing lane is often the wide lane beside flap barriers, and shift change sets the number of lanes.
• Factories and warehouses in the Phase 2 and Phase 3 industrial areas, where a swing lane with a steel barrier lets trolleys and two-wheelers through next to tripod turnstiles used by workers.
• Schools, coaching institutes and hospitals, which want controlled entry with a wide lane for wheelchairs and prams.

ZKTeco swing barrier models we suggest

Lane width and rated life are from ZKTeco’s data sheets. Current prices are on the swing barrier price in Noida page and the full swing barrier price list.

What we check at a Noida site

• Residents and guests. For societies we plan resident cards or face enrolment, guest entry by the guard and, if needed, a link to the society’s visitor app or visitor management software.
• Shift-change flow. For offices and factories we count the busiest 15 minutes and add lanes or bi-directional lanes so the queue does not spill outside.
• Open or semi-open entrances. Clubhouse and factory gates are often only partly covered; we check rain and dust exposure and suggest a canopy where the model needs one.
• Wide lane. At least one 900 mm lane for wheelchairs, prams and goods; the Saturn-S2000 goes up to 1200 mm with a steel barrier.
• Fire safety. The wings must open on a fire alarm or power cut; we connect the lanes to the fire alarm panel and test it.

How we install a swing barrier

1. Free site survey: we measure the entrance, count the peak flow, check the floor, power point and network, and note the fire exit route.
2. Layout and model: you get a drawing with the number of lanes, the wide lane, reader positions and a written, itemised quotation.
3. Base and conduits: cable conduits are laid under the floor between the cabinets (core-cutting on finished stone is planned with your facility team).
4. Fixing and wiring: cabinets are anchored and aligned, the swing arms set, and readers, controller and power connected.
5. Software and enrolment: cards or faces are enrolled and the lanes are linked to access control, attendance or visitor management.
6. Fire alarm test and handover: we test that the wings open on a fire alarm signal and on power failure, train the guards and hand over the test record.
7. AMC: after the warranty, preventive visits and breakdown support under our AMC.

Not sure which gate to use? Read flap vs swing vs tripod or the turnstile gate guide. We also cover Greater Noida and Ghaziabad.

Questions from Noida buyers