Where tripod turnstiles are used in Rewari, Bawal and Dharuhera
A tripod turnstile has three arms that turn a step for each person, so only one person passes per card, finger or face. How turnstiles, readers and controllers work in general is on our tripod turnstile page. Around Rewari it is used mostly at these gates:
| Site | What matters | What we usually suggest |
|---|---|---|
| Auto component and engineering plants in the Bawal Industrial Growth Centre | Permanent and contract workers on two or three shifts, a few hundred people at shift change, oily or worn fingers | Two or more SUS304 lanes at the workers’ gate with face readers or RFID cards, each pass also used as the attendance punch |
| Plants in the Dharuhera Industrial Area | One main gate for workers, visitors and material | Turnstile lanes for workers, with a separate side gate for material and visitors so the lanes do not block |
| Vendor units supplying the larger plants | Small staff, customer audits asking for a controlled entry | A single compact tripod lane with a card or face reader and an entry log |
| Canteen entries inside plants | Meal counts per shift | A compact tripod with a card reader that counts each pass |
| Warehouses along NH-48 near Kapriwas, Masani and Sidhrawali | Seasonal and contract staff added and removed quickly | A turnstile in a covered spot at the staff gate, with cards that can be blocked the day a contract ends |
For a covered office or reception entrance a flap barrier often looks better, and for an unmanned boundary gate a full height turnstile is harder to climb. Our flap vs swing vs tripod guide compares them.
Points we check at the gate
- How many people per shift. One tripod lane handles roughly 20 to 30 people a minute. For a shift change of several hundred workers in a few minutes we suggest two or more lanes side by side.
- Reader type. Where hands are oily or fingerprints are worn from machine work, many fingerprints do not read, so we usually suggest face readers or RFID cards at the turnstile. Fingerprint readers suit offices.
- Shed, dust and rain. Most cabinets are SUS304 stainless steel rated for splashes (IPX4 or IP44), not for direct rain. We plan a shed or canopy over the lanes at open gates.
- Floor and cabling. The turnstile is bolted to a level concrete floor; the cable to the readers and the controller is laid in a conduit before the floor is finished.
- Emergency exit. The arms drop on power loss or a fire alarm signal so people can leave freely, and we keep a separate wide emergency gate next to the lanes.
- Attendance link. When each pass is also the attendance punch, the readers send entries to the attendance software, so HR does not need a separate machine at the gate.
Tripod turnstile models and prices
Mapple Infocom is an authorised ZKTeco distributor; we also supply eSSL. Some models we often suggest for plants around Rewari, with prices from our tripod turnstile price list (per turnstile, GST extra):
| Model | Type | Suits | Price |
|---|---|---|---|
| ZKTeco TS1000 Plus | Compact vertical, SUS304, 550 mm lane | Narrow gates, canteen entries, vendor units | ₹42,400 + GST |
| eSSL ET-2000 | Bridge type, SUS304, built-in controller | Factory workers’ gates | ₹46,042 + GST |
| ZKTeco TS2000 Plus | Bridge type, SUS304, readers under the lid | Busy workers’ gates | ₹47,100 + GST |
| ZKTeco TS5000A | Automatic (motor-driven arm), SUS304 | Controlled entry at offices and canteens | ₹48,000 + GST |
| ZKTeco Saturn-T1000 | Drop arm, powder-coated steel cabinet | Budget single lanes | ₹52,800 + GST |
| ZKTeco TS200 Pro | Bi-directional, SUS304, 580 mm lane | Two-way gates | ₹56,600 + GST |
Card, fingerprint or face readers, the access controller and the software are quoted with the turnstile, because they depend on how you want people to pass and whether the gate also gives attendance. The price list has the reader options and complete-gate examples; installation, shed, civil work and cabling are confirmed after the site survey.
What supply and installation include
- Site survey of the gate, the shift or meal timings and the floor, and a lane layout with the emergency gate.
- Supply of genuine turnstiles, readers and controller with the manufacturer warranty.
- Installation: fixing to the floor, cabling in conduit, reader and controller setup, and testing every pass mode and the fire alarm release.
- Enrolment and attendance link: cards, fingers or faces enrolled, and the readers linked to your attendance software if needed.
- Support and AMC after the warranty, including turnstiles installed by other vendors.
Get a quotation
Call or WhatsApp +91 97119 00801 (WhatsApp) with the number of people per shift or meal time, the gate width and a few photos of the gate, or use our contact page. We do not have an office in Rewari; survey and installation teams travel to Rewari, Bawal and Dharuhera from our office in Sector 14, Gurugram, along NH-48 via Manesar, by appointment. Many plants need a gate pass or safety induction for our team, so please tell us the entry process in advance. For other systems in the area see security systems in Rewari and Dharuhera, biometric attendance machine in Rewari, access control in Rewari, boom barrier in Rewari, CCTV in Rewari, visitor management in Rewari and fire alarm system in Rewari; nearby, see tripod turnstile in Manesar, tripod turnstile in Bhiwadi and tripod turnstile in Sonipat.
Questions from Rewari buyers
Do you install tripod turnstiles in Rewari, Bawal and Dharuhera?
Yes. Our teams travel from our Gurugram office along NH-48 to plants and vendor units in the Bawal Industrial Growth Centre and the Dharuhera Industrial Area and to warehouses near Kapriwas, Masani and Sidhrawali. Surveys and installation are fixed by appointment.
What is the price of a tripod turnstile in Rewari?
On our website the ZKTeco TS1000 Plus is Rs 42,400 + GST, the eSSL ET-2000 Rs 46,042 + GST, the ZKTeco TS2000 Plus Rs 47,100 + GST and the ZKTeco TS5000A Rs 48,000 + GST per turnstile. Readers, controller, installation and any shed or civil work are added in the quotation after the site survey.
How many turnstile lanes does a plant gate need?
One tripod lane handles roughly 20 to 30 people a minute. If several hundred workers arrive at shift change within a few minutes, two or more lanes side by side keep the queue short. We confirm after seeing the gate and the shift timings.
Which reader is best for workers with oily or worn fingers?
Face readers or RFID cards. Fingerprints of workers who handle oil, metal or tools often do not read well, so at plant gates we usually fit a face reader or a card reader on the turnstile.
Can the turnstile also record attendance?
Yes. The card, fingerprint or face reader on the turnstile sends each pass to the attendance software, so the entry through the gate is also the attendance punch and HR gets the usual daily and monthly reports.
Call +91 97119 00801, message us on WhatsApp or request a quote. We will plan a site survey and send a written quotation.




