Where we install fire alarm systems in Rewari and Dharuhera
The Rewari belt has three very different kinds of buildings: large two-wheeler and auto component plants in Bawal and Dharuhera with vendor units around them, long warehouse sheds along NH-48, and a growing town with group housing, schools, hospitals and markets. A fire alarm has to suit each of them:
| Site | What usually matters |
|---|---|
| Auto component and engineering plants in the Bawal Industrial Growth Centre and Dharuhera Industrial Area | Machining and press shops, heat-treatment and paint lines, oil and spares stores. We use heat detectors near furnaces, ovens and paint lines, smoke detectors in stores, MCC and panel rooms and offices, and call points at every exit, with hooters loud enough for the press shop. |
| Vendor units and small sheds around Bawal and Dharuhera | Single sheds that supply the bigger plants and often need a working system for their customer audit: a compact conventional panel, a few zones and clear labelling usually does the job at a low cost. |
| Warehouses and cold stores along NH-48 near Kapriwas, Masani and Sidhrawali | High roofs, racked aisles, forklift charging and cold rooms: detectors chosen for the roof height and temperature, call points at docks and aisles, and an addressable panel at the security cabin that shows the exact bay. |
| Housing societies in Dharuhera and Rewari city sectors | Towers with lift lobbies, basements, DG and pump rooms: detectors in common areas and service rooms, hooters on every floor, and interface modules for lifts and fans where the building has them. |
| Schools, hospitals, hotels and markets in Rewari city | Classrooms, wards and kitchens on several floors: zones per floor or block, a panel at the reception or security desk, and a clear evacuation sound on every floor. |
Conventional or addressable for a Rewari site?
A conventional system shows only the zone in alarm and suits a vendor shed, shop or single office floor. For large plants in Bawal and Dharuhera, sites with several buildings and long warehouses on NH-48, an addressable system usually works out better, because it shows the exact detector and makes false alarms from heat or dust easier to trace. The conventional vs addressable guide explains the choice, and the main fire alarm system page lists the brands we supply, including Honeywell, Notifier, Morley and Agni panels.
Fire alarm system price in Rewari
The total cost, including installation charges, depends on the number of detectors and call points, the type of panel, the cable length between sheds, the roof height and extras such as interface modules, repeaters or flashers. Prices of devices on our website, for supply (GST extra), are the same as in Delhi NCR:
| Item | Type | Price |
|---|---|---|
| Securico smoke detector | Conventional smoke detector | ₹1,150 + GST |
| Securico hooter | Fire alarm hooter / sounder | ₹720 + GST |
| Control panel, heat detectors, call points, flashers, repeater or network panel, cable | Conventional or addressable | Quoted after the site survey |
After the survey you get an itemised quotation with every device, the panel, the cable and the installation charges shown separately. Work in running plants can be planned on weekly offs, holidays or between shifts.
Haryana fire NOC and audits
Factories, warehouses, hospitals, schools and multi-storey buildings in Rewari district usually need a working fire detection and alarm system for the fire NOC from the Haryana fire services and for its renewal, and the fire officers inspect the system on site. Many vendor units also face safety audits from the plants they supply. Our part is to install a system that suits the building, test every detector and call point with your safety team, and hand over the device list, layout drawing and test record for the file.
Old systems and AMC
Many older sheds in Dharuhera and Bawal have a panel that shows faults all the time, detectors that keep going off near paint lines or furnaces, dead batteries or hooters that cannot be heard over the machines. We check the existing system, give a written list of faults with what each costs to fix, and then maintain it under AMC, including systems installed by another contractor.
What supply, installation and AMC include
- Site survey and detector layout on your plant or building drawing.
- Supply of panel, smoke and heat detectors, call points, hooters, flashers and fire-rated cable.
- Cabling, mounting, panel programming, networking of panels where needed, and zone or device labelling.
- Testing of every device with your team, and handover documents for the NOC and audit file.
- AMC: quarterly preventive visits, detector testing and cleaning, battery checks and breakdown support, as on our AMC page.
Get a quotation
Send the building layout or a few photos on WhatsApp at +91 97119 00801, or use our contact page. Survey and installation teams travel to Rewari, Dharuhera and Bawal from our office in Sector 14, Gurugram, along NH-48 via Manesar. For other systems in the area see security systems in Rewari and Dharuhera and visitor management in Rewari and Dharuhera; nearby, see fire alarm system in Manesar and fire alarm system in Bhiwadi.
Questions from Rewari buyers
Do you install fire alarm systems in Rewari and Dharuhera?
Yes. We supply, install and maintain conventional and addressable fire alarm systems for factories, vendor units, warehouses, housing societies, schools and hospitals across Rewari, Dharuhera and Bawal, including the Bawal Industrial Growth Centre, Dharuhera Industrial Area, Kapriwas, Masani and Sidhrawali.
Which detector should be used near a paint line or heat-treatment furnace?
Smoke detectors near paint lines, ovens or heat-treatment furnaces give false alarms, so we use heat detectors in those areas and keep smoke detectors in stores, panel rooms and offices. These areas are kept on separate zones so the panel shows them clearly.
Who issues the fire NOC in Rewari?
Rewari, Dharuhera and Bawal are in Haryana, so the fire NOC is issued by the Haryana fire services after their inspection. We install and test the system and hand over the device list, layout and test record for your file.
What are the fire alarm installation charges in Rewari?
Installation is quoted per site, because it depends on the number of devices, cable length, roof height and working hours. On our website a Securico smoke detector is Rs 1,150 + GST and a hooter is Rs 720 + GST; the panel, cable and installation are shown separately in an itemised quotation after the survey.
Do you take AMC of an existing fire alarm system in Dharuhera or Bawal?
Yes. We first check the existing system and give a written list of faults with the cost of each repair, and then maintain it under AMC with quarterly visits, including systems installed by another contractor.
Call +91 97119 00801, message us on WhatsApp or request a quote. We will plan a site survey and send a written quotation.




